Product Description
This Kit contains the Metal Sub Mount / Frame Bracket
This SUB mount kit fits the OEM Billet and Forged Triple clamps. The stock Rubber mounted triple clamps will now be a "SOLID" mount system. None of Stock bar mounting components are used with this kit. This SUB system will raise the bars 24mm in height and has two front to back bar positions that equate to the the options available with stock bar mounting The new design frame bracket consists of three parts. on most models, installation is done without removing the top triple clamp. Models equipped with a factory steering lock will require the locking device to be removed as it will not clear the damper mounting components. Removal of the steering lock does require the triple clamp to be taken off and then re-installed. Step by step pictured instructions are included along with all the necessary hardware.
The Kit is designed for those of you that have the Scotts Damper unit
BRP Adjustable Solid Mount
- Low Profile Stem Nut & all necessary Hardware
- Scotts Frame Bracket and Dust Cover
- Hour meter relocation Bracket & all necessary hardware
- Damper Booklet and Fitting Instructions
SUB Mounting a stabilizer offers several benefits over the conventional "above bar" setup and has become the preferred setup for motocross, offroad, dual sport applications and taller riders.
- Offers approx 25mm taller bar position
- Lower bend bars can be can be used to compensate for additional height
- SUB Mounting reduces the risk of bodily injury
- Stabilizer is tucked away and protected from potential damage from a crash.
- 3mm offset bar perches to maximize rider comfort
SUB mount stands for Stabilizer Under Bars, originally designed for raising the bars. These kits are designed for use with Oversize bars. "Bar reducers" are available as an option, to convert the kit to standard diameter bars, should that be desired. This concept allows more room for other equipment such as, Global Positioning Systems(GPS) or Enduro/Rally computers and yet still retain the quick access for adjusting the stabilizer. This is also good for the taller rider who wants his bars a little higher, as it raises the bar location approximately 11-25mm, depending on the model of bike. In some cases, you might consider a lower bend handlebar bend at the same time, unless you are trying to achieve a higher bar height along with your stabilizer installation. We can also help you with other handlebar choices to match your desired setup, as we have a full selection of handlebars to choose from on this website. The SUB mounts are only available on certain models based on the physical limitations of mounting in this area. Each SUB mount comes complete with all necessary parts, hardware and "Step by Step" pictured instructions. If you have any questions, feel free to call or email us. The Photo attached here may be a generic photo to show you the basic components in the kit, but may not be showing the exact kit for your specific bike.
